paladin 923 50x

Overview

Analogue twilight switch
DIN-rail mounting 17,5 mm
The control unit for DIN-rail mounting allows easy adjustment
The sensor unit for wall-mounting (923 500) or mounting within enclosure (923 501) is included in delivery
Two adjustment ranges 1-100 / 50-1000 Lux
Time delay approx. 8 sec when switching ON and approx. 40 sec when switching OFF
Switching OFF value is approx. 1.4 times the value of switching ON
While setting the Lux-value the diode lights up if Lux-value corresponds to the current light intensity.
Zero-cross switching for relay-saving switching

The device fits for the particular use of the following tasks: light control for streets, outdoor stairs, shop windows, buildings etc.
Operate the device in a dry room only! (the sensor is mounted outdoors)
The installation must be in accordance with the instruction manual.
The device is not qualified for security relevant tasks such as emergency doors, fire protection equipment.

Supply voltages	230 V, 50 Hz
Power consumption (real power)	0,5 W
Channel	Normally open
Switching capacity resistive load: inductive load:	16 A / 250 V~ at cosϕ=1 4 A at cosϕ=0,6
Zero-cross switching	Yes / for relay-saving switching
Contact material	AgSnO2
Filament Lamp Halogen Lamp	3.000 W
Fluorescent Lamp uncompensated	3.600 W
Fluorescent Lamp parallel compensated (130 µF)	1.300 W
Compact Fluorescent Lamp	18 x 7 W 12 x 11 W 10 x 15 W 10 x 20 W 10 x 23 W max.
Switching-On value	1–100 / 50–1.000 Lux
Time delay	approx. 8 sec. at ON, approx. 40 sec. at OFF
Switch-off	approx. 1.3 times the value of switching ON
Mounting	35 mm DIN-rail
Permitted ambient temperature	Sensor unit –35…+50 °C Control unit –10…+40 °C
Type of protection	IP 54 for sensor 923500 IP 54 for sensor 923501 IP 20 for control unit
Sensor wiring, cross section	min. 0,5 mm²