Illuminare
Pagina 1 / 2

Crepuscolari

paladin 923 500

Overview

  • Analogue twilight switch
  • DIN-rail mounting 17,5 mm
  • The control unit for DIN-rail mounting allows easy adjustment
  • The sensor unit for wall-mounting (923 500) is included in delivery
  • Two adjustment ranges 1-100 / 50-1000 Lux
  • Time delay approx. 8 sec when switching ON and approx. 40 sec when switching OFF
  • Switching OFF value is approx. 1.4 times the value of switching ON
  • While setting the Lux-value the diode lights up if Lux-value corresponds to the current light intensity.
  • Zero-cross switching for relay-saving switching

Intended use

  • The device fits for the particular use of the following tasks: light control for streets, outdoor stairs, shop windows, buildings etc.
  • Operate the device in a dry room only! (the sensor is mounted outdoors)
  • The installation must be in accordance with the instruction manual.
  • The device is not qualified for security relevant tasks such as emergency doors, fire protection equipment.

Codice ordinativo

Logo Paladin
923 500
1 Kanal
Lichtfühler-Aufbau
Hugo Müller GmbH & Co KG | Karlstraße 90 | D-78054 VS-Schwenningen
Tel: +49 (0) 7720 80 836 | Fax: +49 (0) 7720 80 83 88 | E-Mail: info@hugo-mueller.de | Internet: www.hugo-mueller.de
Illuminare
Pagina 2 / 2

Crepuscolari

paladin 923 500

Order information

VoltageEANArt. No.
923 500
230 V 50 Hz402270922977922977

Technical data

Supply voltages 230 V, 50 Hz
Power consumption (real power) 0,5 W
Channel Normally open
Switching capacity
resistive load:
inductive load:
16 A / 250 V~ at cosϕ=1
4 A at cosϕ=0,6
Zero-cross switching Yes / for relay-saving switching
Contact material AgSnO2
Filament Lamp Halogen Lamp 3.000 W
Fluorescent Lamp uncompensated 3.600 W
Fluorescent Lamp parallel compensated (130 µF) 1.300 W
Compact Fluorescent Lamp 18 x 7 W
12 x 11 W
10 x 15 W
10 x 20 W
10 x 23 W max.
Switching-On value 1–100 / 50–1.000 Lux
Time delay approx. 8 sec. at ON,
approx. 40 sec. at OFF
Switch-off approx. 1.3 times the value of switching ON
Mounting 35 mm DIN-rail
Permitted ambient temperature Sensor unit –35…+50 °C
Control unit –10…+40 °C
Type of protection IP 54 for sensor 923500
IP 20 for control unit
Sensor wiring, cross section min. 0,5 mm2
Rights to technical amendments reserved / Technische Änderungen vorbehalten
Droits de modifications techniques réservés / Suscettibile di errori e modifiche